The Two-Cloth-One-Membrane Composite Geomembrane Is A High-Performance Geotechnical Material
Product Introduction
The two-cloth-one-membrane composite geomembrane is a synthetic material, which is composed of two layers of geotextile and one layer of geomembrane, and has the functions of anti-seepage, isolation, reinforcement, etc. The width of this material is usually 4-6 meters, and the weight ranges from 200-1500 grams per square meter. It has high physical and mechanical performance indicators such as tensile strength, tear resistance and bursting resistance.
Product Properties
* Good anti-seepage and waterproof performance
* Good elasticity and the ability to adapt to the deformation
* Good ageing resistance, corrosion resistance ability
* Under high temperature use and long service life
Product Application
The product has high strength, good extensibility, large modulus of deformation, acid and alkali resistance, corrosion resistance, aging resistance, impermeability and so on.
Construction
Composite geomembrane can meet the needs of water conservancy, municipal, construction, transportation, Subway, tunnel, engineering construction, such as anti-seepage, isolation, reinforcement, crack reinforcement and other civil engineering needs. Commonly used in dykes, drainage ditch anti-seepage treatment, as well as waste yard anti-pollution treatment.
Product Specification
Product Specification and Technical Index (GB/T 17642-2008)
| Item |
Specifications |
Remark |
| Geotextile Unit Weight (g/㎡) |
300 |
500 |
600 |
700 |
800 |
900 |
1000 |
1100 |
|
| Geomembrane Thickness (mm) |
0.25-0.35 |
0.30-0.50 |
|
| Nominal Fracture Strength (KN/m) |
2.50 |
7.50 |
10 |
12 |
14 |
16 |
18 |
20 |
|
| Breaking Strength (KN/m,≥,LD/TD) |
2.50 |
7.50 |
10 |
12 |
14 |
16 |
18 |
20 |
|
| Standard Intensity Corresponding Elongation Rate (%) |
30~100 |
|
| CBR Burst Strength (KN,≥) |
0.70 |
1.50 |
1.90 |
2.20 |
2.50 |
2.80 |
3.00 |
3.20 |
|
| Longitudinal Tear Strength (KN,≥) |
0.05 |
0.25 |
0.32 |
0.40 |
0.48 |
0.56 |
0.62 |
0.70 |
|
| Hydrostatic Pressve (Mpa) |
See List Below |
|
| Peel Strength (N/cm,≥) |
6 |
|
| Vertical Permeability Coefficient (cm/s) |
According to design or contract mentioned. |
|
| Width Variation (%) |
-1.00 |
|
| |
Specification
Item |
Geomembrane Thickness (mm) |
Remark |
| 0.20 |
0.30 |
0.40 |
0.50 |
0.60 |
0.70 |
0.80 |
1.00 |
| Hydrostatic Pressve (Mpa) |
One geotextiles with one geomembrane |
0.40 |
0.50 |
0.60 |
0.80 |
1.00 |
1.20 |
1.40 |
1.60 |
|
| Two geotextiles with one geomembrane |
0.50 |
0.60 |
0.80 |
1.00 |
1.20 |
1.40 |
1.60 |
1.80 |
|
Product Tags:
|
|
Two Cloth One Membrane Composite Geomembrane 0.2~3mm Thickness Images
|
